Online customer service
Online customer service system
NEWS

Why and how will the LED rock lights are needed to be installed for the off-road driving adventure

23-03-2024
LED rock lights made aluminum housings
LED rock lights can be useful in a variety of situations, both on and off the road. Here are some applications for which you might install LED rock lights:

1) Improved Visibility: During off-road night driving adventure, LED rock lights illuminate the ground around and beneath the vehicle, revealing obstacles and uneven terrain that LED headlights might miss. This can be very improtant for safe maneuvering on trails or rough roads.

2) Technical Maneuvers: When performing repairs or maintenance on your off-road vehicle at night, having a bright light source near the ground is essential. LED rock lights provide the necessary illumination for tasks like changing a flat tire or fixing mechanical problems.

3) Camping and Exploration: LED rock lights can serve as a camping light source, providing a wide area of illumination for setting up camp, cooking, or socializing outdoors.
4)Safety: Some LED rock lights offer strobe functions that can increase your vehicles visibility to other drivers in low-light conditions, especially when parked on the side of the road.

Besides, someone may use led rock lights for general Lighting, for example,Even for on-road driving, LED rock lights can be helpful in situations where you need extra illumination around the vehicle. This could be useful for checking a dark trailer hitch, maneuvering in tight spaces at night, or finding something you dropped near your car.
Customization and Style: LED rock lights, particularly RGB rock lights with various color options, can add a personalized feel to your vehicles appearance.

It will be easy and interesting to install LED rock lights on your jeeps or off-road SUV to improve visibility and personalize your drive.

simple diagram about the connections of led rock lights
Before your installations, you need to prepare the following tools and materials:

1)LED rock light kit (including lights, wiring harness, control box (optional) and mounting hardware)
2)Drill with various drill bits (metal and plastic depending on mounting locations)
3)Zip ties
4)Wire strippers/cutters
5)Heat shrink tubing (optional, recommended for weatherproofing connections)
6)Phillips head screwdriver
7)Socket wrench set (optional, depending on mounting locations)
8)Masking tape (optional, for marking drilling locations)
9)Safety glasses
10)Gloves (recommended)

Disconnect the batterys negative terminal before starting any electrical work. Pay attention to existing wires and components when drilling to avoid accidental damage.Wear safety glasses and gloves to protect yourself from debris and sharp edges.

Use the provided mounting hardware or craft brackets using appropriate materials.Depending on the chosen location, you might need to drill holes for mounting. Mask the drilling spots for precision if needed.

Route the wiring harness according to your plan, securing it with zip ties at regular intervals to prevent chafing and ensure a clean look. Typically, youll connect the positive and negative wires from the light pods to the corresponding wires on the wiring harness. Use wire strippers to expose a small section of wire for each connection.Twist the exposed wires together securely and crimp on a connector. For additional weatherproofing, apply heat shrink tubing over the connection points and use a heat gun to shrink it down.

The wiring harness might have a cigarette lighter adapter or require connection to the vehicles electrical system. If connecting directly to the battery, identify a constant power source (usually a red wire) and a grounding point (usually a black wire) on your Jeeps wiring harness. Double-check the wires with a voltmeter before making connections. Again, refer to the wiring diagram and use appropriate connectors to create secure and weatherproof connections.

Now you have finised most of the installations, and you can make a final test before you start your exciting off-road adventure.

Turn on the LED rock lights using the provided switch (or smartphone app if applicable).Verify that all lights function properly. Make any necessary adjustments to the wiring or light positioning. Secure any loose wires with zip ties and clean up the installation area.

By following the above-mentioned steps, you can successfully install your LED rock lights and enhance your functionality and style for your off-road explorations. 
Share to the following social media