NEWS
NEWS
How can you install our triple leds tailgate light bar safely onto your pickup truck
23-11-2024
Triple LED tailgate light bar is very important for the driving safety and parking of a pickup truck. If you want to install it on your pickup truck by yourself, you need to follow up the following steps for proper installations.
With a ruler, measure and decide on the best position for the led tailgate light. Do not forget the major factors such as visibility,aesthetics and obstructions. Mark the mounting points on the tailgate.
Make holes with a drill at the marked points. Make sure that the size of the holes are correct for your mounting tools. Fix the led tailgate light bar to the tailgate by screw and bolts,then tighten them well to prevent movement.
The working voltage of this led tailgate light is 12V DC, choose a correct wiring harness adapter or splice , connect the wires to power supply for specific connections for ground,running light,brake light,turn signal an reverse light. Test the voltage at each wire by multimeter to ensure correct polarity.
Finally, turn on the ignition of your pickup truck. Check if the color patterns of the led tailgate light bar is correct or not, for example,amber color for turn signals, white color for reverse lights indications, red color for brake and drl lights functions. If the brightness and indications is satisfactory, your installations are successful and finished.
Follow the above steps and take your time, you can install a triple LED tailgate light bar on your pickup truck easily.